ROS: Kann Paketkonfigurationsdateien nicht finden

Question

EDIT: Okay, also habe ich beschlossen, etwas zufälliges zu versuchen, ich habe Rospy auch als eine erforderliche Komponente diktiert. Ich habe alle OpenCV-Sachen aus meiner cmakelists-Datei entfernt, und jetzt spuckte sie einfach den gleichen Fehler bezüglich rospy..und dem gleichen Deal mit std_msgs aus. Ich begann zuerst mit ROS auf diesem Computer, den ich mit den ROS Tutorials verwende, und alles funktionierte gut bis zu diesem Punkt ..

Ich weiß, eine Menge Leute haben Probleme damit, laufen catkin_make/cmake und zu sehen dass es nicht Ihre OpenCV-Dateien zu finden:

Could not find a package configuration file provided by "OpenCV" with any 
    of the following names: 

    OpenCVConfig.cmake 
    opencv-config.cmake 

auch dieser Fehler, wenn ich versuchte nur roscpp, rospy mit, etc .:

Could not find a package configuration file provided by "roscpp" with any 
    of the following names: 

roscppConfig.cmake 
roscpp-config.cmake 

Hier ist, was ich bisher versucht: Export OpenCV_DIR, CMAKE_PREFIX_PATH usw. usw. Die meisten von das Zeug, das die Leute hier auf dem Stapel vorgeschlagen haben. Kommt immer noch mit diesem Fehler. Überprüfen, um sicherzustellen, dass ich OpenCV korrekt installiert habe, mit IDMTEST finde ich alles. Ich opencv völlig in Ordnung mit Python verwenden kann usw.

Neben Tsyvarev Lösungen aus den Kommentaren: Wenn es einfach find_package (OpenCV), dann sollte jeder helfen: 1. Cmake -DOpenCV_DIR =/usr/share/OpenCV .... 2. cmake -DCMAKE_PREFIX_PATH =/usr. 3. Exportieren Sie CMAKE_PREFIX_PATH =/usr.

Ich habe diese .cmake Dateien befinden sich in: /usr/share/OpenCV und /usr/local/share/OpenCV

nicht sicher, ob sie könnten irgendwo anders befinden, versucht, eine Massensuche zu tun und es scheint nur sein Hinweis auf diese beiden speziellen Ordner

Ging durch meine CMakeLists.txt Datei und hinzugefügt, um die Verzeichnisse, Ziel Bibliotheken usw., wie durch die .cmake Datei diktiert

ich bin wirklich nicht sicher, was zu diesem Zeitpunkt zu tun ist.

Einige Code/Dateien:

cmake_minimum_required(VERSION 2.8.3) 
project(briancv) 

## Find catkin macros and libraries 
## if COMPONENTS list like find_package(catkin REQUIRED COMPONENTS xyz) 
## is used, also find other catkin packages 
find_package(catkin REQUIRED COMPONENTS 
    roscpp 
    rospy 
    std_msgs 
    message_generation 
) 

## System dependencies are found with CMake's conventions 
# find_package(Boost REQUIRED COMPONENTS system) 


## Uncomment this if the package has a setup.py. This macro ensures 
## modules and global scripts declared therein get installed 
## See http://ros.org/doc/api/catkin/html/user_guide/setup_dot_py.html 
# catkin_python_setup() 

################################################ 
## Declare ROS messages, services and actions ## 
################################################ 

## To declare and build messages, services or actions from within this 
## package, follow these steps: 
## * Let MSG_DEP_SET be the set of packages whose message types you use in 
## your messages/services/actions (e.g. std_msgs, actionlib_msgs, ...). 
## * In the file package.xml: 
## * add a build_depend tag for "message_generation" 
## * add a build_depend and a run_depend tag for each package in MSG_DEP_SET 
## * If MSG_DEP_SET isn't empty the following dependency has been pulled in 
##  but can be declared for certainty nonetheless: 
##  * add a run_depend tag for "message_runtime" 
## * In this file (CMakeLists.txt): 
## * add "message_generation" and every package in MSG_DEP_SET to 
##  find_package(catkin REQUIRED COMPONENTS ...) 
## * add "message_runtime" and every package in MSG_DEP_SET to 
##  catkin_package(CATKIN_DEPENDS ...) 
## * uncomment the add_*_files sections below as needed 
##  and list every .msg/.srv/.action file to be processed 
## * uncomment the generate_messages entry below 
## * add every package in MSG_DEP_SET to generate_messages(DEPENDENCIES ...) 

## Generate messages in the 'msg' folder 
add_message_files(
    FILES 
    Num.msg 

) 

## Generate services in the 'srv' folder 
add_service_files(
    FILES 
    AddTwoInts.srv 
) 

## Generate actions in the 'action' folder 
# add_action_files(
# FILES 
# Action1.action 
# Action2.action 
#) 

## Generate added messages and services with any dependencies listed here 
generate_messages(
    DEPENDENCIES 
    std_msgs # Or other packages containing msgs 
) 

################################################ 
## Declare ROS dynamic reconfigure parameters ## 
################################################ 

## To declare and build dynamic reconfigure parameters within this 
## package, follow these steps: 
## * In the file package.xml: 
## * add a build_depend and a run_depend tag for "dynamic_reconfigure" 
## * In this file (CMakeLists.txt): 
## * add "dynamic_reconfigure" to 
##  find_package(catkin REQUIRED COMPONENTS ...) 
## * uncomment the "generate_dynamic_reconfigure_options" section below 
##  and list every .cfg file to be processed 

## Generate dynamic reconfigure parameters in the 'cfg' folder 
# generate_dynamic_reconfigure_options(
# cfg/DynReconf1.cfg 
# cfg/DynReconf2.cfg 
#) 

################################### 
## catkin specific configuration ## 
################################### 
## The catkin_package macro generates cmake config files for your package 
## Declare things to be passed to dependent projects 
## INCLUDE_DIRS: uncomment this if you package contains header files 
## LIBRARIES: libraries you create in this project that dependent projects also need 
## CATKIN_DEPENDS: catkin_packages dependent projects also need 
## DEPENDS: system dependencies of this project that dependent projects also need 
catkin_package(
    ... 
    CATKIN_DEPENDS message_runtime ... 
    ...) 
# INCLUDE_DIRS include 
# LIBRARIES beginner_tutorials 
# CATKIN_DEPENDS roscpp rospy 
# DEPENDS system_lib 


########### 
## Build ## 
########### 

## Specify additional locations of header files 
## Your package locations should be listed before other locations 
# include_directories(include) 
include_directories(
    ${catkin_INCLUDE_DIRS} 
) 

## Declare a C++ library 
# add_library(beginner_tutorials 
# src/${PROJECT_NAME}/beginner_tutorials.cpp 
#) 

## Add cmake target dependencies of the library 
## as an example, code may need to be generated before libraries 
## either from message generation or dynamic reconfigure 
# add_dependencies(beginner_tutorials ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS}) 

## Declare a C++ executable 
# add_executable(beginner_tutorials_node src/beginner_tutorials_node.cpp) 

## Add cmake target dependencies of the executable 
## same as for the library above 
# add_dependencies(beginner_tutorials_node ${${PROJECT_NAME}_EXPORTED_TARGETS} ${catkin_EXPORTED_TARGETS}) 

## Specify libraries to link a library or executable target against 
# target_link_libraries(beginner_tutorials_node 
# ${catkin_LIBRARIES} 
#) 

############# 
## Install ## 
############# 

# all install targets should use catkin DESTINATION variables 
# See http://ros.org/doc/api/catkin/html/adv_user_guide/variables.html 

## Mark executable scripts (Python etc.) for installation 
## in contrast to setup.py, you can choose the destination 
# install(PROGRAMS 
# scripts/my_python_script 
# DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION} 
#) 

## Mark executables and/or libraries for installation 
# install(TARGETS beginner_tutorials beginner_tutorials_node 
# ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION} 
# LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION} 
# RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION} 
#) 

## Mark cpp header files for installation 
# install(DIRECTORY include/${PROJECT_NAME}/ 
# DESTINATION ${CATKIN_PACKAGE_INCLUDE_DESTINATION} 
# FILES_MATCHING PATTERN "*.h" 
# PATTERN ".svn" EXCLUDE 
#) 

## Mark other files for installation (e.g. launch and bag files, etc.) 
# install(FILES 
# # myfile1 
# # myfile2 
# DESTINATION ${CATKIN_PACKAGE_SHARE_DESTINATION} 
#) 

############# 
## Testing ## 
############# 

## Add gtest based cpp test target and link libraries 
# catkin_add_gtest(${PROJECT_NAME}-test test/test_beginner_tutorials.cpp) 
# if(TARGET ${PROJECT_NAME}-test) 
# target_link_libraries(${PROJECT_NAME}-test ${PROJECT_NAME}) 
# endif() 

## Add folders to be run by python nosetests 
# catkin_add_nosetests(test) 

Auch wenn ich Optionen ausprobiert 1-3 von Tsyvarev gegeben:

-- Using CATKIN_DEVEL_PREFIX: /home/camera/catkin_ws/src/briancv/devel 
-- Using CMAKE_PREFIX_PATH: /usr 
-- Using PYTHON_EXECUTABLE: /usr/bin/python 
-- Using Debian Python package layout 
-- Using empy: /usr/bin/empy 
-- Using CATKIN_ENABLE_TESTING: ON 
-- Call enable_testing() 
-- Using CATKIN_TEST_RESULTS_DIR: /home/camera/catkin_ws/src/briancv/test_results 
-- Found gtest sources under '/usr/src/gtest': gtests will be built 
-- Using Python nosetests: /usr/bin/nosetests-2.7 
-- catkin 0.6.18 
CMake Warning at /opt/ros/indigo/share/catkin/cmake/catkinConfig.cmake:76 (find_package): 
    Could not find a package configuration file provided by "roscpp" with any 
    of the following names: 

    roscppConfig.cmake 
    roscpp-config.cmake 

    Add the installation prefix of "roscpp" to CMAKE_PREFIX_PATH or set 
    "roscpp_DIR" to a directory containing one of the above files. If "roscpp" 
    provides a separate development package or SDK, be sure it has been 
    installed. 
Call Stack (most recent call first): 
    CMakeLists.txt:7 (find_package) 


-- Could not find the required component 'roscpp'. The following CMake error indicates that you either need to install the package with the same name or change your environment so that it can be found. 
CMake Error at /opt/ros/indigo/share/catkin/cmake/catkinConfig.cmake:83 (find_package): 
    Could not find a package configuration file provided by "roscpp" with any 
    of the following names: 

    roscppConfig.cmake 
    roscpp-config.cmake 

    Add the installation prefix of "roscpp" to CMAKE_PREFIX_PATH or set 
    "roscpp_DIR" to a directory containing one of the above files. If "roscpp" 
    provides a separate development package or SDK, be sure it has been 
    installed. 
Call Stack (most recent call first): 
    CMakeLists.txt:7 (find_package) 


-- Configuring incomplete, errors occurred! 
See also "/home/camera/catkin_ws/src/briancv/CMakeFiles/CMakeOutput.log". 
See also "/home/camera/catkin_ws/src/briancv/CMakeFiles/CMakeError.log". 

Answer 1

Could not find a package configuration file provided by "roscpp" with 
any of the following names: 

     roscppConfig.cmake 
     roscpp-config.cmake 

Dies geschieht, wenn ROS eine Abhängigkeit ist und es nicht installiert ist . Installieren Sie es von hier: http://wiki.ros.org/ROS/Installation und wiederholen.